By reading the following DIY project you consent to the terms in the DIY disclaimer.

How to Install a Sump Pump

Installing a sump pump is a critical task for many homeowners, particularly those in areas prone to basement flooding. While the process can be a DIY project for those with a bit of home improvement experience, it’s often a job best left to professionals, like the HVAC experts at Oliver. Below, we’ll walk through the steps of installing a sump pump and highlight why, in many cases, calling in experts like Oliver is the safer and more efficient choice.

Understanding the Basics of a Sump Pump

A sump pump is a device installed in the lowest part of a basement or crawlspace. Its primary role is to help keep the area under the building dry and to prevent it from flooding. Pumps are installed in specially constructed sump pits, and water flows into the pit through drains or natural migration through the soil. The pump’s job is to pump the water out of the pit and away from the building so the basement or crawlspace stays dry.

Tools and Materials NeededHow To Install A Sump Pump

  • Sump pump
  • PVC pipes and fittings
  • Check valve
  • Gravel
  • Cement
  • Drill with hole saw
  • Hand saw
  • Tape measure
  • Level
  • Gravel
  • Perforated basin or liner
  • Sump pump cover (if needed)

Guide for How to Install a Sump Pump

  1. Choose the Location: The ideal location for a sump pump is the lowest point in your basement or crawlspace where water tends to accumulate.
  2. Dig the Sump Pit: Dig a hole wide and deep enough to fit your sump basin or liner. The pit should be about 18 inches wide and 24 inches deep.
  3. Install the Basin: Place the basin in the hole and fill around it with gravel for stability. Make sure the basin is level.
  4. Prepare for the Pump: Place the sump pump inside the basin.
  5. Install Check Valve: This is installed on the discharge line to prevent water from flowing back into the basin after being pumped out.
  6. Run the Discharge Line: The discharge pipe should be run out of the house. Drill a hole through the exterior wall if necessary. Ensure the line slopes away from your home.
  7. Test the System: Fill the basin with water and plug in the pump to test it. Adjust as necessary.

Leave it to the HVAC Professionals

Considering the complexity of selecting and installing the right sump pump, handling electrical connections, and drilling through foundations, it’s often safer and more efficient to rely on Oliver’s HVAC professionals. Our expertise ensures a perfect fit and installation for your home, saving you time and providing peace of mind with guaranteed work. Given the potential hazards and technical challenges of the job, the professional service offered by Oliver is invaluable for many homeowners.

Reach Out to the Experts at Oliver Today

While installing a sump pump can be a DIY project, it’s not without its challenges. For many homeowners, turning to the experienced HVAC professionals at Oliver for your sump pump installation is a wise choice. Instead of trying to search for answers regarding how to install a sump pump, leave it to the pros. Contact us online today to discuss your sump pump needs and schedule an appointment with our skilled team.

Need help with this project?

If you do not have the time, tools, or experience necessary to complete the project, please contact the professionals at Oliver for help.

Contact us today at 1-888-810-2681 Get a Free Estimate
Google Rating
4.6
Based on 1956 reviews
×
js_loader
Schedule Online

"*" indicates required fields

SCHEDULE AN APPOINTMENT ONLINE

This field is for validation purposes and should be left unchanged.

During extreme conditions, response times may be delayed. We will do our best to accommodate your request. Your patience is appreciated.

Schedule Online